Ordenar y Filtrar
Mostrar

Discos de diamante

Productos

PRODIAMANT TILE LEOPARD continuous-rim diamond blade for porcelain and ceramic tile, 7/8" arbor

PRODIAMANT Disco de diamante para porcelanato y cerámica – Borde continuo sin desportillar, eje de 7/8"

PRODIAMANT

De
$12.79
PRODIAMANT TURBO PANTHER turbo-rim diamond blade for concrete, brick and stone, 7/8" arbor

PRODIAMANT Disco de diamante turbo para concreto, ladrillo y piedra – Corte en húmedo o seco, eje de 7/8"

PRODIAMANT

De
$14.70
PRODIAMANT CONSTRUCTION RACCOON segmented all-purpose diamond blade for concrete, brick, stone and tile, 7/8" arbor

PRODIAMANT Disco de diamante multiusos para concreto, ladrillo, piedra y cerámica – Húmedo o seco, eje de 7/8"

PRODIAMANT

De
$13.19
Ahorra
10%
PRODIAMANT TILE LEOPARD continuous-rim diamond blade for porcelain and ceramic tile, 7/8" arbor

PRODIAMANT Disco de diamante para porcelanato y cerámica, paquete de 3 – Borde continuo sin desportillar, eje de 7/8"

PRODIAMANT

De
$34.53 | $38.37
Ahorra
10%
PRODIAMANT TURBO PANTHER turbo-rim diamond blade for concrete, brick and stone, 7/8" arbor

PRODIAMANT Disco de diamante turbo para concreto, ladrillo y piedra, paquete de 3 – Corte en húmedo o seco, eje de 7/8"

PRODIAMANT

De
$39.69 | $44.10
Ahorra
10%
PRODIAMANT CONSTRUCTION RACCOON segmented all-purpose diamond blade for concrete, brick, stone and tile, 7/8" arbor

PRODIAMANT Disco de diamante multiusos, paquete de 3 – Concreto, ladrillo, piedra y cerámica, húmedo o seco, eje de 7/8"

PRODIAMANT

De
$35.61 | $39.57
Ahorra
15%
PRODIAMANT TILE LEOPARD continuous-rim diamond blade for porcelain and ceramic tile, 7/8" arbor

PRODIAMANT Disco de diamante para porcelanato y cerámica, paquete de 10 – Borde continuo sin desportillar, eje de 7/8"

PRODIAMANT

De
$108.71 | $127.90
Ahorra
15%
PRODIAMANT TURBO PANTHER turbo-rim diamond blade for concrete, brick and stone, 7/8" arbor

PRODIAMANT Disco de diamante turbo para concreto, ladrillo y piedra, paquete de 10 – Corte en húmedo o seco, eje de 7/8"

PRODIAMANT

De
$124.95 | $147.00
Ahorra
15%
PRODIAMANT CONSTRUCTION RACCOON segmented all-purpose diamond blade for concrete, brick, stone and tile, 7/8" arbor

PRODIAMANT Disco de diamante multiusos, paquete de 10 – Concreto, ladrillo, piedra y cerámica, húmedo o seco, eje de 7/8"

PRODIAMANT

De
$112.11 | $131.90

Los discos de diamante PRODIAMANT son discos de corte de 4" a 10" para esmeriladoras angulares y sierras circulares con eje estándar de 7/8". Tres tipos de disco cubren la obra: el Tile Leopard de borde continuo para cortes sin desportillar en porcelanato y cerámica, el Turbo Panther de borde turbo para cortar rápido en húmedo o en seco en concreto, ladrillo y piedra, y el Construction Raccoon segmentado multiusos para trabajos donde el material cambia constantemente. Cada disco está disponible por unidad o en paquete de 3 y paquete de 10 con precio para contratistas.

¿Qué disco de diamante necesito?

  • Porcelanato, cerámica, gres, mármol: borde continuo (Tile Leopard) – cantos lisos y sin desportillar, corte en seco con la esmeriladora.
  • Concreto, ladrillo, bloque, adoquín, piedra natural: borde turbo (Turbo Panther) – el corte más rápido, en húmedo o en seco.
  • Materiales mixtos en un mismo trabajo: disco segmentado multiusos (Construction Raccoon) – concreto, ladrillo, piedra y cerámica sin cambiar de disco.

Tamaños y compatibilidad

Los diámetros van de 4" (105 mm) y 4.5" (115 mm) a 5", 6", 7", 9" y 10" (254 mm). El eje de 7/8" encaja en esmeriladoras angulares DeWalt, Makita, Milwaukee, Bosch y Metabo; los discos de 7" a 10" también sirven en sierras circulares y de banco con eje de 7/8".

Todos los discos y copas de diamante PRODIAMANT son de ingeniería alemana y se fabrican conforme a la norma EN 13236, el estricto estándar europeo de seguridad para herramientas de diamante.

Todos los pedidos salen de nuestro almacén en EE. UU. en un plazo de 24 horas en días hábiles y suelen llegar entre 2 y 5 días hábiles después. Envío gratis en todos los pedidos dentro de EE. UU. y devoluciones en 30 días.

Which Blade for Which Material

Match the rim to the material. That is the whole decision.

  • TILE LEOPARD – a thin continuous rim for porcelain, ceramic, and glazed tile. The closed rim cuts slower but leaves a clean edge with minimal chipping.
  • TURBO PANTHER – a turbo rim for granite and other hard stone. The serrated turbo rim clears debris faster than a continuous rim while keeping the cut edge tight.
  • CONSTRUCTION RACCOON – a segmented rim for concrete, brick, and block. The gullets between segments move dust out and keep the blade cool during fast, aggressive cuts.

If a job mixes materials, carry two blades and swap. A segmented blade chips tile. A continuous rim glazes over in cured concrete. There is no single blade that does both well.

Arbor and Machine Fit

PRODIAMANT diamond saw blades use the standard 7/8" arbor and ship with a 5/8" reducer ring, so they mount on common US angle grinders and tile saws without extra adapters. Before mounting any blade, compare the maximum RPM printed on the blade with the no-load speed of your machine. The blade rating must be equal to or higher than the machine speed. Never run a blade above its rated RPM, and never remove the guard to make a larger blade fit.

Wet or Dry Cutting

All three blades cut dry on an angle grinder. Work in intervals: cut, back off, let the blade run free for a few seconds to cool. Continuous dry cutting overheats the rim and shortens blade life. For long cuts in tile or stone, run the blade wet on a tile saw – water cools the rim and improves cut quality. On concrete and masonry there is a second reason to control dust: OSHA’s silica rule (29 CFR 1926.1153) requires water delivery or vacuum dust collection for most saw work on US jobsites. Plan water or a vacuum before you start the cut, not after.

Frequently Asked Questions

Can I use one diamond saw blade for both tile and concrete?
Not with good results. A segmented concrete blade chips porcelain and tile, and a continuous-rim tile blade glazes over in cured concrete. Use the TILE LEOPARD for tile and the CONSTRUCTION RACCOON for concrete and masonry.
Do these diamond saw blades fit a standard US angle grinder?
Yes. They come with a 7/8" arbor and an included 5/8" reducer ring, which covers common US angle grinders and tile saws. Always check that the blade diameter matches your guard.
What is the difference between a continuous, turbo, and segmented rim?
A continuous rim cuts cleanest and slowest, ideal for porcelain and ceramic. A turbo rim cuts faster in hard stone like granite while keeping a tight edge. A segmented rim cuts fastest and coolest in concrete, brick, and block.
Can I cut dry, or do I need water?
Dry cutting works on an angle grinder if you cut in intervals and let the blade cool. For long cuts, wet cutting on a tile saw gives a cleaner edge and longer blade life. On concrete and masonry, OSHA 29 CFR 1926.1153 requires water or vacuum dust collection for most saw work.
How do I know when a diamond saw blade is worn out or glazed?
If the blade slows down and starts to rub instead of cut, the rim is likely glazed. A few short cuts in an abrasive material such as a soft brick can re-expose the diamonds. If the rim height is visibly gone, replace the blade.